Diagnostic WABCO TOOLBOX PLUS + ECAS CAN2 V3.00 [06.2025][1PC] v14.5.0.0

Link password:







Vehicle uptime is a major industry focus, and Meritor WABCO is contributing to improved fleet productivity by offering diagnostic tools that accommodate quick, accurate assessments, returning vehicles to the road faster.

Meritor WABCO TOOLBOX is the latest version of its PC-based diagnostic software. It expedites vehicle diagnosis, increases uptime, optimizes technicians' work on trailer diagnosis, and minimizes downtime.

Supported Features for Meritor WABCO TOOLBOX for Tractor
SmartTrac™ Stability Control Systems
Pneumatic ABS
Electronic Braking Systems (EBS)
OnGuard™ Collision Mitigation System
Extended DTC event information and data decoding
OnLane™ and OnLaneALERT™ Lane Departure Warning
Video extraction capability and system diagnostics
OnSide™ Blind Spot Detection System
OptiRide™ Electronically Controlled Air Suspension (ECAS)
ECAS for Tractor (12V) and Buses (24V)
Supported Features for Meritor WABCO TOOLBOX for Trailer
iABS™, Enhanced Easy-Stop™ & Easy-Stop™ Trailer ABS and Roll Stability Support (RSS)
Ability to program ABS for Auto Lift Axle via Graphical User Interface (GUI)
Supports ABS GIO functions such as Smart Brake Interlock, AutoTail, and Tire Inflation
Notebook functionality for text input into the ECU to store warranty or ownership information including in-service date, VIN, and place of install
Service interval notification for vehicles equipped with WABCO ABS or RSS
Embedded links to web-based diagnostic information
Straightforward tire size calibration
TailGuard™ Rear Blind Spot Detection System Truck (Medium Duty), Bus, and Motor Home Chassis
SmartTrac™ Stability Control Systems
SmartTrac Hydraulic ABS and HABS-E (Hydraulic Anti-Lock Braking System, E version)
Hydraulic Power Brake (HPB)
Easy parameter programming when replacing an ECU
Ability to enable and disable ATC without programming
Comprehensive main screen that allows review of components such as wheel speed sensors, front/rear brake pressure, park brake status, ECU information, and more
Basic Program Functions
Displays static and dynamic information from the system under test
Displays active and stored system faults, as well as the appropriate repair instructions
Activates system components to verify system integrity and correct component operation and installation wiring
Provides direct digital access to product maintenance manuals and installation instructions
Provides reverse Diagnostic Trouble Code (DTC) lookup
Provides Aftermarket Programming for most pneumatic and hydraulic ABS ECUs, and OnLaneALERT™
J1939 Bus Monitor for 500k Baud
New Features
New user interface featuring a menu-based grouping of applications, as well as placement of most used functions at the top of the screen for easy access
Pre-populated warranty case forms for direct email to the WABCO Customer Care Center
Automatic roll call functionality, which automatically detects and populates eligible WABCO systems included on the vehicle
Product support for WABCO’s latest product releases
Installation Procedure
Attention! Installation procedure via the TeamViewer remote access program.

System Requirements
Operating System: Microsoft Windows® XP, Vista, Windows 7, 8.1, 10, or 11
4 GB RAM
10 GB hard disk space for full installation

Release Notes


14.5 (June 2025)

1.) OnGuardMAX - SOP2 support, Dynamic camera calibration update, GUI changes
2.) AMP for STP - Added additional allowable replacement P/Ns
3.) AMP for OGC - New
4.) AMP for OGR - New
5.) AMP for SRR - New
6.) E8_PABS - Changed DID for ESC enabled
7.) mBSP - Added HSA On switch, Added new parameters, Added DTC HTML file
8.) EPHS - Maintenance Manual update
9.) OL - Removed DTC check before Service Alignment, Supported new source address 0xFC
10.) OGP - Added Reset Event Counter
11.) iABS - Valve activation and System name update


14.4 (Dec 2024)

1.) OnGuardMAX - SOP2 support


14.3 (Nov 2024)

1.) mBSP - Brake Performance Monitoring added
2.) AMP for mBSP - Added additional allowable replacement P/Ns
3.) AMP for SmartTrac HABS - Added additional allowable replacement P/Ns
4.) Trailer iABS - Wheel circumference added to EOL report

Version 14.2.1 (September 2024)
OnGuardMAX - EDR update added
EPHS - I/O control added and DTCs updated
mBSP - Enhanced wheel speed sensor data display
Trailer RSS - Brake Pad Wear GIO added
Enhanced security settings
Version 14.2 (April 2024)
OnGuardMAX - EDR functionality added
iABS - Switch setup added to Tag Axle GIO
Version 14.1 (April 2024)
Toolbox Main - OnGuardMAX and SRR added to Roll Call
AMP for E8 - New P/Ns added to replace old E4 P/Ns
EBS - Brake pedal and voltage screens added; valve test and ECU reset added
SmartTrac HABS - Current steering angle and steering angle offset added to ESC screen
SRR - Measurement data added
ECAS CAN2 Calibration - P/N 301 compatibility added
ECAS CAN2 and OnGuardMAX - Nexiq USB-Link 3 and Noregon DLA+ 3.0 capability added
iABS - Minor update
Version 14.0 (December 2023)
OnLaneALERT (SRR) Diagnostics - New
OnGuardMAX Diagnostics - New
AMP for mBSP - Added additional allowable replacement P/Ns
Version 13.8.4 (October 2023)
Revised security settings
Version 13.8 (February 2023)
EPHS Diagnostics - New
OnGuard and OnLane - Added additional P/Ns
RSS - Added OptiFlow AutoTail GIO; allowed SafeStart + Auto Lift Axle GIO combination
Version 13.7 (July 2022)
OnGuard - Updated HTML help files and maintenance manual
E8 and mBSP - Minor display updates
AMP for E8/mBSP/SmartTrac HABS - Added additional allowable replacement P/Ns
iABS - Added full EEPROM dump; allowed Axle Load + Brake Pad Wear GIO combination
RSS - Added Double Tag Axle GIO; user can select location when saving fault report
Updated registration component
Version 13.6 (February 2022)
mBSP and SmartTrac HABS - Updated HTML help files
AMP for E8/mBSP/OnLane2/SmartTrac HABS - Added additional allowable replacement P/Ns
iABS - Added Service Interval; added override switch to Lift Axle; allowed VIN of 1-17 digits
Updated registration component
Version 13.5 (August 2021)
mBSP - Added additional addresses to Parameter Save
mBSP AMP - Added R2101 Part Numbers
EBS - ESC end-of-line added
iABS - Axle load monitoring updates; Pull Trailer; Brake Pad Wear; e/f allowed on Lift Axle; VIN save
OnLane - TOOLBOX determines if OnLane1 or OnLane2 is connected and invokes the correct diagnostic program
Updated registration component
Version 13.4 (April 2021)
mBSP - Added additional addresses to Parameter Save
mBSP AMP - Added R2001 Part Numbers
SmartTrac HABS AMP - Added additional Part Numbers
Version 13.3 (February 2021)
iABS - 2S/2M Sensor Orientation Test update
RSS - TailGuard now works in conjunction with Auto Lift Axle
Version 13.2 (December 2020)
Aftermarket Programmers - Added more part numbers to E4, E8, and SmartTrac HABS AMPs
RSS - TailGuard added to the GIO list
Updated registration component
Version 13.1 (October 2020)
OnLane - Updated to work with C9.2.2 (diagnostics and Aftermarket Programmer)
SmartTrac HABS - Added occurrence counts to DTC screen
Aftermarket Programmers - Updated issue reading VIN; added new P/Ns
iABS - Added lamp type to Tag Axle
Version 13.0 (May 2020)
TailGuard Diagnostics - New
iABS Diagnostics - New
New user interface
Warranty Submission Form - OnGuard, E8, mBSP
Version 12.12 (October 2019)
E4 Aftermarket Programmer - Updated B20 error for Basic ECUs
SmartTrac Hydraulic Aftermarket Programmer - Added XBR checksum calculation for ESC ECUs
ABS+ Aftermarket Programmer - Added Parameters 0412-0415
E8 Aftermarket Programmer - Added E8.14 capability